Wall Preparation

Welcome to Design Cloud. Browsing on Design Cloud is free and does not require an account.

The wall surface should be:

  • Flat
  • Clean
  • Dry
  • Free of mildew, grease, or other stains
For best results, apply the Wall Covering or Poster to a wall surface that has been painted with one coat of primer and one coat of latex paint. If the paint is old or flaking, priming is highly recommended. Old wallpaper and adhesive should be removed by sanding, or adhesive remover and primer should be applied to the clean, smooth wall surface prior to application. Applying a Wall Covering or Poster to paneling, or wall currently covered with wallpaper, is not recommended.

We recommend that you use a squeegee to apply Wall Art. Below is a list of tools recommended for the application of Wall Covering. The application of a Wall Poster will also require most, if not all, of these tools depending on its size.

  • Smoothing tool
  • Utility knife with spare blades
  • Sponge
  • Level or plumb-bob
  • Drop cloth
  • Wall panel tray (included with every wall purchase)
  • Tape measure
  • Ladder
Remember to use all tools as per manufacturer’s safety instructions.

There are some tricks to applying your project. If the panel covers a portion of wall with a door, window, or fixture:
1. Use a straight edge to push the panel flush against the wall or the obstruction.
2. Use a utility knife to cut away excess material around the object leaving enough material that it hangs just slightly over the obstruction.
3. Use a flathead screwdriver or other flat tool to tuck the excess material behind the obstruction.

Panel numbers are printed at the bottom of each strip. Apply the panels in numerical order following the wetting and booking process described in the installation instructions included in the product package.

Distance A is the distance from the edge to the middle of the wall, and is where the starting line should be plumbed. If the project settings are set as “Overlap”, then the first panels should be positioned in the following way:

  • Odd number of panels: Align the plumbing line with the center of the first panel
  • Even number of panels: Place the edge of the first panel on the vertical line

The output of the tool is a multipage PDF. It can be used in any material or printer, but proven end to end flow is using HP B2B Wall Covering Paper and HP Latex Printers. Other flows have not been qualified.

While it is important to use a damp sponge to remove bubbles during the initial application, there's no need to worry about clearing smaller bubbles at this time. After 15 minutes, smooth out any remaining large bubbles using a smoothing tool. Bubbles that are smaller than a quarter will dissipate as the wall covering sets.

1. Use a sponge and water to thoroughly wet the wall art.
2. Once the wall art is wet, peel it from the wall (if it sticks use additional water).
3. Clean off the residual paste with a sponge and water.
The removal performance of this product is dependent upon a wide range of factors including surface preparation, installation technique, and conditions of the room environment.

Account

Welcome to Design Cloud. Browsing on Design Cloud is free and does not require an account.

Registering is quick and easy, we require only a password in addition to the email that you provide. Having an account lets you keep track of your orders’ status from your dashboard easily.

To change your connected email address or change your email notifications, follow the steps below:

On the upper right hand corner of any page you’ll see a link called ’Account’ or your username if you’re signed in. Click on your username to access your user account dashboard.

Select "Account settings". You are then able to change your connected email address, shipping address, and specify if you’d like to receive email from The Design Cloud.

It happens to the best of us. Go to this page so you can set a new one.

Yes! If you like a product just click on the desire (heart) icon below it. This will automatically save it to your desired list, which you can find under your account dashboard. On the upper right hand corner of any page you’ll see a link called 'Account' or your username if you’re signed in. Click on your username to access your user account dashboard.

Buying

Welcome to Design Cloud. Browsing on Design Cloud is free and does not require an account.

We are accepting payment with Visa, Mastercard & American Express. All credit cards used for payment must have a valid billing address.

All orders are encrypted with Secure Sockets Layer (SSL) technology on both your end and ours. SSL encrypts all of your personal information including credit card number, name, and address, so that it cannot be read as the information travels over the Internet. In order for SSL to work, you must use an SSL-enabled browser.

For your own safety we do not save any payment information. Payments are made directly through Stripe—certified to PCI Service Provider Level 1, the most stringent level of certification, so we can guarantee that important information stays confidential and private.

When you buy something on Design Cloud, the money goes into a neutral escrow account so the Seller does not get paid until you have received your product and had time to review it.

The funds are not released until 48 hours after Design Cloud has gotten confirmation that you have received your item. So you can be confident that you will get what you bought and know that it is what it is advertised to be.

In “My orders” you can see the progress of all of them. Once delivered, you will receive more information on how to track the package and when it will arrive.

To check the status of your sale, hover over your profile icon in the top right corner of the screen. Click it and choose ‘Orders’ in your dashboard, which is a page of all your active and previous orders.

If on the right hand side of the listing title the icon is Orange, it means that the item has not shipped yet. You will receive a shipping confirmation email when the tracking number has been put into the system and your order receipt with your dashboard will provide the info for you to track the shipment.

Shipping & Return

Welcome to Design Cloud. Browsing on Design Cloud is free and does not require an account.

The products are delivered directly from the creators to your doorstep. The Loppist doesn’t handle any direct shipping at this moment, but we pre-screen and only carefully select creators who are deemed reliable / trustworthy and have previous experience shipping their creations.

We work with our creators to use recommended and trusted shipping carriers for our featured sellers, but this may vary if the seller has a trusted / better alternative he/she is comfortable with.

In case of any concerns, please reach out to contact us.

This depends on the creator and the nature of the products. We try to collaborate with creators who ship worldwide but some products might not be available to ship to your country. The countries that is available for shipping is clearly indicated in the product or check out page.

This is subjective depending on where the package is sent from and its destination. Also the size of the product and delivery type (standard or express) will affect the price. Delivery costs are clearly stated on the checkout page while buying.

*Some countries may charge customs and duties for your parcel. You are responsible for these customs and duties charges.

The delivery time depends on the distance between you and the creator. Our creators offer regional to worldwide shipping depending on the product. The expected delivery time is clearly stated on the product page, and on the checkout page.

The seller can select 4, 7,14 or 21 days for shipping and handling times. It will vary depending on the item as handcrafted goods may take more time to create and ship.

See the terms and conditions page for more specific information regarding delivery times.

Be sure to check out shipping company’s estimated delivery time when they send you the tracking number for your order.

Privacy & Policy

Welcome to Design Cloud. Browsing on Design Cloud is free and does not require an account.

Design Cloud may collect personally identifiable information, such as your name. Design Cloud may also collect anonymous demographic information, which is not unique to you, such as your age and gender. We may gather additional personal or non-personal information in the future.


Information about your computer hardware and software may be automatically collected by Design Cloud. This information can include: your IP address browser type, domain names, access times and referring website addresses. This information is used for the operation of the service, to maintain quality of the service, and to provide general statistics regarding use of the Design Cloud website.

Design Cloud collects and uses your personal information to operate its website(s) and deliver the services you have requested.


When you place an order on the Site, you must provide your first and last name, a valid email address, phone number, billing address, shipping address, and credit card number. We will use this information to fulfill the order you place and to communicate with you about it.


Design Cloud uses your information for four purposes: (1) to fulfill the orders you place on the Site, (2) to answer any customer service inquiries that you may have, (3) to contact you about special offers, Design Cloud news and new products and (4) to understand the shopping habits of our customers to better serve them in the future.

The Design Cloud uses cookie to improve and personalize your experience on our site by remembering you or your preferences during your visit(s) to the site.


If a Site doesn’t use cookies, it will think you are a new visitor every time you move to a new page on the Site. Our Site uses cookies to remember things like your preferences, shopping cart or to remember who you are on return visits.


You have the ability to accept or decline cookies. Most Web browsers automatically accept cookies, but you can usually modify your browser setting to decline cookies if you prefer. If you choose to decline cookies, you may not be able to fully experience the interactive features of the Design Cloud services or websites you visit.

Design Cloud does not knowingly collect personally identifiable information from children under the age of thirteen. If you are under the age of thirteen, you must ask your parent or guardian for permission to use this website.